INSTALL | WINDOW

Table of Contents

DIY Install Kit

Ensure you have our unique Lennox Security DIY Kit

  • 4 x Clear 6mm Spacers
  • 2 x Black Spacer Wedges
  • 1 x Hinge Marking Tool
  • 1 x Strike Centre Tool
  • 1 x Strike Marking Tool
  • 1 x Triple Lock Marking Tool
  • 1 x Security Bit
  • 18 x Security Screws
  • 1 x Lennox Security Pencil

1. Test fit the screen

Test fit the screen by holding it up to the window frame, making sure that there is at least a 15mm overlap across each edge.

2. Press screen onto frame

Once you have confirmed screen placement, take off the plastic covering the sticky dots and then press the screen into place.

3. Screw into place

Using the security bit and security screws supplied, mount the screen in place by putting a screw every 300mm across the entire edge of the frame.

Are you ready to start?

YES